D-Link Wireless ADSL2/2+ 4-port Ethernet Router DSL-2640U - Manual (Page 7)

6
Connecting the Router to Your Computer
Connect the Telephone Cable
•
Connect one end of the telephone cable to the DSL port on the router and
the other end of the cable into the wall socket.
Connect the Ethernet Cable
• Connect one end of the Ethernet cable to one of the 4
LAN ports on the
back of the router and attach the other end to an Ethernet Adapter or
available Ethernet port on your computer. Or, you can attach it to a switch /
hub first and connect your computer to the switch / hub.
Connect the Power Adapter
• Complete the process by connecting the power adapter to the
Power input
on the back of the router and then plug the other end of power adapter into a
wall outlet or power strip. Then turn on the router and boot up your PC and
any LAN devices, such as hubs or switches, and any computers connected to
them.
LAN
1-4
On / Off
Button
*
Console—for use by D-Link repair service personnel only.
Reset
Button
Console * DSL
Port Power
Input