Virtual server – D-Link Wireless ADSL2/2+ 4-port Ethernet Router DSL-2640U User Manual

Page 32

Text mode
Original mode

Virtual Server

If you enable NAT (Network Address Translation), you can configure the Virtual
Server, Port Triggering, and DMZ Host.

NAT—Virtual Servers Setup

A virtual server allows you to direct incoming traffic from the WAN side to a
specific IP address on the LAN side.The following figure shows the screen that

allows you to configure your virtual server(s). Click on the Add button to configure
a virtual server.

Select the virtual server from the drop-down list and complete the server IP address,

then click on Apply once.