ABUS Technologies Log Box-RHT with LCD Data Logger - Manual (Page 18)

ABUS TECHNOLOGIES INC.
18
Log Box-RHT
Alarm settings screen
Channel 2: Opens the Channel 2 Settings screen, where channel 2 can be set up. This channel is for
relative humidity measurements.
The fields of this screen are the same as the ones from Channel 1 Setting
screen, however, for relative humidity measurements it is not possible to
associate alarms, but it is possible to disable the relative humidity
measurements. Cancel and OK buttons cancel and save configurations
defined in the Channel Settings screen.
Clocks: Provides access to Logger and Palm clocks. When a new configuration is sent
to the logger, clocks are updated.
Offset: It allows fine offset adjustment on the measured value. The Reset button clears
changes made and the logged values are the measured values again.
Offset adjust screen
After configuring clocks in the Settings screen, click Apply to send this configuration to the
Logger, returning to the Monitoring screen. Sending a new configuration implies the exclusion of all
data collected present in the logger memory.