ABUS Technologies Log Box-RHT with LCD Data Logger - Manual (Page 11)

ABUS TECHNOLOGIES INC.
11
Log Box-RHT
Click the button to start the communication between the logger and the
software; the Parameters Configuration window is then displayed (as shown in figure
Configuration Window, below), showing the current configuration and information
about the logger.
New configuration parameters defining the operation mode for a new
application can be entered. The user can also obtain general information about the
device. The fields of the configuration window are described below:
Configuration window (Acquisition Tab)
FIELDS ARE:
Title: In this field, the user identifies the logger by
assigning it a name.
General information: Area with information about the logger, such as
Model, Serial Number, Logger Date/Time, PC
Date/Time, firmware version, memory capacity
and number of acquisitions stored in memory, etc.
In this field, time is constantly updated while the communication between logger and
computer is taking place.