ABUS Technologies TAGTEMP Data Logger - Manual (Page 10)

ABUS TECHNOLOGIES INC.
10
TagTemp

Maximum: The value logged will be the maximum value found within ten consecutive
measurements taken within a predefined interval. The minimum interval between
measurements is 10 seconds.

Minimum: The value logged will be the minimum value found within ten consecutive
measurements taken within a predefined interval. The minimum interval between
measurements is 10 seconds.
Offset: Makes possible to correct the value logged.
Alarm: Defines limit values that, when exceeded, characterize an alarm condition. Alarm events are
informed to the user through a flashing mode of the Alarm Indicator.
After filling all the fields select OK and settings will be sent to the logger.
4.6 Palmtop User
To have communication between the logger and the PDA established, the user must align the
PDA infrared wand to the logger communication window, run the LogChart Palm-OS software, wake up
the logger and press Search Device in the Recorded Data screen.
When the PDA finds the logger, the Monitoring screen will be displayed. The screen displays
values of variables measured, configuration information and current logger status.
PDA Monitoring screen
Buttons are assigned the following functions:
Search: It allows "searching" for another logger or reconnect communication lost for any reason. After
finding a logger, the PDA displays a new Monitoring screen.
Download: Offload logged data. Download can be partial and it does not interfere in the ongoing
measurement process.
More Info: Displays further information on the connected logger, such as model, serial number, version
and memory capacity.
Settings: Accesses the Settings screen, which allows for modifying the logger configuration.
Data Base: Displays the Recorded Data screen listing all the processes stored and processed in the
PDA data base.