ABUS Technologies RHT WM with LCD Датчики - Manual (Page 7)

ABUS TECHNOLOGIES INC.
7
RHT
The model RHT/WM (Wall Mount) was designed to be mounted directly onto a
wall. With the cover off, the user can access the 2 fixing points and the signal
connector, as shown in figure RHT/WM fixing holes and housing dimensions, below. The
transmitter sensor capsule must be placed faced down in order to assure the specified
accuracy and protection level.
RHT/WM fixing holes and housing dimensions.
4. ORDERING DETAILS
TYPE DESCRIPTION
Product RHT Humidity and temperature transmitter
Mounting
D
* Please Specify
Immersion Length
Duct Mounting
W Standard Length Wall Mounting
Configuration
M Range (Temp. & HY), Burnout, Programmable
N All parameters Factory Setting
Output
0 0~10V dc
4 4~20mA dc
Immersion
Length
*
If Mounting is opted as
“D”, please mention the
immersion length.
6 150mm
10 250mm
? Customized
Accessories
N None
L With LCD Display
Y With RS485 Communication
Example: RHT > D > M > 4 > 6 > Y