ABUS Technologies RHT WM with LCD Датчики - Manual (Page 10)

ABUS TECHNOLOGIES INC.
10
RHT
The transmitter requires to be powered during configuration. The ATxConfig
provides powering; however this depends on the PC used. To assure proper
communication, it is recommended to apply external power to the transmitter. A 9V
battery connected to the battery socket in the ATxConfig interface extremity can be used
to power the transmitter during the configuration. Another option is to run the transmitter
configuration when it is already connected to the process, using the same power that
powers the process. Refer to figure Connections of the ATxConfig Interface.
After making such connections, users must run the ATxConfig software and, if
necessary, use the Help to configure the transmitter. Figure ATxConfig software Main
Window, shows the ATxConfig Main Windows.
ATxConfig Main Window
The fields, in the above ATxConfig main window, are described as under:
1. Measuring range: Defines the beginning and the end of the transmitter humidity
and temperature range.
a. Lower Value: sets the value of the input signal (RH or temperature)
associated to the 4 mA output.