ABUS Technologies RHT WM with LCD Датчики - Manual (Page 6)

ABUS TECHNOLOGIES INC.
6
RHT
3. DIMENSIONS
The RHT-DM (Duct Mount) model transmitter should be installed with a flange.
This flange is first screwed onto the duct wall and the transmitter probe is then inserted
into the flange central hole and locked. Figure Mounting Flange for RHT, below shows
flange dimensions and holes. It is also available in stainless steel or polyamide 6.6.
Mounting flange for RHT-DM.
The probe is made in stainless steel, with standard lengths of 150 mm and 250 mm.
Model RHT/DM dimensions.