Dynex DX-32L130A10 - Manual (Page 11)

8
Making connections DX-32L130A10
Programming a universal remote control
to work with your TV
You can operate your TV with a new or existing
universal remote control.
To program a universal remote control:
1 Find the code for your universal remote control
by identifying its model (or your set-top box’s
remote control manufacturer and model) on
the charts below, then make note of the
numbered code below it. You will use the
numbered code to program your remote
control to work with your TV.
Codes for other remote controls are available
online at:
www.dynexproducts.com\t-customer_support.
aspx
Tips:
• The brand name is often visible on the front of the
universal remote control, and the model number is
often visible on the back.
• If your universal remote control isn’t listed on the
chart, refer to your universal remote control’s
instructions and try codes for the brands Orion,
Emerson, Memorex, Sansui, Sylvania, or Zenith. You
may need to try several codes before finding a
match.
2 Follow your universal remote control’s
instructions to enter the code you found in Step
1.
Tips:
• If your universal remote control has a code search
feature, run a code search to identify a code that
matches your TV. See your universal remote
control’s instructions for details.
• If your universal remote control has a “Learn”
feature, you can manually program it using your
TV remote to “teach” the commands one at a time.
See your universal remote control’s instructions for
details.
3 If all else fails, you must use a different universal
remote control that can operate both your
set-top box and your TV. Five such remotes are
listed on the chart, but many other compatible
models are available in the market.
For more help, call technical support for your
universal remote control or set-top box
manufacturer, or call the Dynex Customer Care
Center at 1-800-305-2204.
Making connections
Cautions:
Check the terminals for position and type before making any
connections.
Loose connections can result in image or color problems.
Make sure that all connections are tight and secure.
The external audio/video equipment shown in these
illustrations may be different from your equipment. If you
have questions, refer to the user manual that came with
your equipment.
Always turn the power off when connecting external
equipment.
Your TV does not support DTS audio format. If you choose a
DTS audio format, you may not hear the correct audio
output from the TV speakers.
Connecting the power
To connect the power:
• Connect the power cord to the AC in connector
on the back of your TV, then plug the cord into
an AC power outlet.
Important: Your TV only works on 120 V, 60 Hz power.
Notes:
Your TV should only be operated from the power source
indicated on the label.
Always unplug the AC power cord from the AC power outlet
when you will not be using your TV for an extended period
of time.
Dynex TV codes for universal remote controls
(for all Dynex TVs manufactured after Jan. 1, 2007)
Universal remote control manufacturer and model
Philips
PHDVD5,
PH5DSS,
PMDVR8,
PDVR8 RCA
RCU807 One for All
URC-6690 Sony
RM-VL600
115 135 0464 8043
Set-top box manufacturer and model
Comcast
M1057 Dish
Network
VIP508,
VIP622 Motorola
DRC800 TIVO
Series 3, HD DirectTV
RC23
0463 720 0463 0091 10463
DX-L32L130A10_09-0617_MAN_ENG_V1.book Page 8 Thursday, July 30, 2009 2:41 PM