Dell 5400+ User Manual
Page 19
19
AXIS 5400+/AXIS 5600+ User’s Guide
Eng
lish
15. Enter the IP address or host name of your print server (Example: 192.168.3.191)
In the
Logical Printer Name field, enter the port you wish to use; LPT1, LPT2 or COM1. Click
OK.
16. The TCP/IP port will then be added automatically to the list of available ports. Click
Apply and
OK.
17. You may now configure the port, as described below. The Axis Printer Port is now installed.
Configure the Port:
1. Select
Settings | Printers from the Start menu and highlight the printer you wish to
configure. Select
File | Properties | Details and click Port Settings.
2. Choose whether error condition pop-up messages are to be displayed by checking the box in
the
Configure AXIS Ports dialog. Define the frequency at which the error messages should be
displayed after retry. Click
OK.
Note:
If you need additional information, refer to the
AXIS 5400+/AXIS 5600+ User’s Manual on
www.axis.com
Proceed to Print Server Management and Configuration on page 23 for information on supported
management and configuration tools.
Even if the desired printer is available in the Manufacturers and Printers lists, you are advised to use the print
driver provided with the printer. This assures you of the latest driver software.