English – Denon DHT-M330DV User Manual

Page 48

ENGLISH

(3) 6.1- or 7.1-channel surround playback

Changing the Quick Setup settings
At “SPEAKER SETUP” under “Quick Setup procedure” (page 27), select the configuration to be used, “6.1CH” or “7.1CH”.

Checking and adjusting the playback level using test tones
Before playing, use test tones to check and adjust the playback level of the different speakers. (Page 33)
• Depending on the 6.1/7.1-channel setting, the surround back channel is also displayed and can be set.

Setting the delay time (distance setting)
Set the distance from the different speakers at “(6) Setting the speaker distance” (Page 39) under “10 SURROUND PLAYBACK” (page 33).
• Depending on the 6.1/7.1-channel setting, the surround back channel is also displayed and can be set.

Surround playback in the auto decode mode
When set for 6.1- or 7.1-channel playback, the signals can be decoded and played in the Dolby Digital EX, DTS-ES and Dolby Pro Logic IIx
modes.

• At “1 Dolby Digital and DTS surround playback” on page 34, Dolby Digital and multi-channel sources are played in 6.1 or 7.1 channels in the

Dolby Digital EX or Dolby ProLogic

x mode.

DTS sources are played in 6.1 or 7.1 channels in the DTS-ES or Neo:6 mode.

• For 2-channel sources: Instead of

at “2 channel mode setting” on page 35 -

x surround parameter.

• When Dolby Digital EX or DTS-ES sources are played, “

EX” or “DTS-ES” is displayed and the source is played in 6.1 or 7.1 channels.

• For Dolby Pro Logic

x decoding, “

x” is also displayed and the signals are played in 6.1 or 7.1 channels.

• For DTS Neo:6 decoding, “Neo:6” is displayed.
• For playback sources and surround modes, see “Table of Surround Mode Parameters” on pages 40 and 41.

The playing mode for the different sources can be selected using the surround parameters. (See below.)

• Dolby Digital EX

For 6.1 channels: Dolby Digital EX, Dolby Digital + PLL

x Music

For 7.1 channels: Dolby Digital EX, Dolby Digital + PLL

x Cinema, Dolby Digital+PL

x Music

• DTS

For 6.1/7.1 channels: DTS surround, DTS+NEO:6

• DTS-ES

For 6.1/7.1 channels: none (fixed to DTS discrete or DTS-ES matrix depending on plug)

• Analog, digital (PCM, Dolby Digital, AAC) 2-channel sources

For 6.1/7.1 channels: Auto stereo, PLIIx Cinema, PL

x Music, PL

x Game

For analog and PCM 2-channel sources, DTS-NEO:6 Cinema and DTS-NEO:6 Music can also be used.