Denon DHT-M330DV - Manual (Page 45)

45
ENGLISH
(6) RDS search
Use this function to automatically tune to FM stations that provide RDS service.
1 Set the band to “FM”.
2 Press the RDS button until “RDS”
appears on the display.
Remote control unit
Remote control unit
3 Press the TUNING + (UP) or – (DOWN)
button to automatically begin the RDS
search operation.
Remote control unit
4 When a broadcast station is found, that station’s name
appears on the display.
• If no RDS station is found when all the frequencies are searched,
“NO PROGRAMME” is displayed.
2
3
1
Set the remote
control selector
switches
Switch1 to DVD
Switch2 to TUNER
• If no station broadcasting the designated program type is found
when all the frequencies are searched, “NO PROGRAMME” is
displayed.
(7) PTY search
Use this function to find RDS stations broadcasting a designated program type (PTY).
For a description of each program type, refer to “Program Type (PTY)”.
1 Set the band to “FM”.
2 Press the RDS button until “PTY”
appears on the display.
Remote control unit
Remote control unit
3 Watching the display, press the PTY
button to call out the desired program
type.
Remote control unit
4 Press the TUNING + (UP) or – (DOWN)
button to automatically begin the PTY
search operation.
Remote control unit
5 The station name is displayed on the display after searching
stops.