Subaru 2005 Legacy User Manual

Page 522

11-23

Maintenance and service

– CONTINUED –

6. Pour the coolant and fill to the reservoir tank’s

“FULL” level mark.

A) Rubber gaskets

7. Put the radiator cap back on and tighten firmly. At

this time, make sure that the rubber gasket in the radi-

ator cap is correctly in place.

8. Start and run the engine for more than five minutes

at 2,000 to 3,000 rpm.

9. Stop the engine and wait until the coolant cools

down (122 to 140

°F [50 to 60°C]). If there is any loss

of coolant, add coolant to the radiator’s filler neck and

to the reserve tank’s “FULL” level.

10.Put the radiator cap and reservoir cap back on and

tighten firmly.

FULL

LOW

UBB508BB

HSB026BC