Subaru 2005 Legacy - Manual (Page 145)

2-20
Keys and doors
lamp will not flash. In this event, perform the
whole procedure again beginning with part 1.
4. Open and close the door once within 15 seconds.
NOTE
" When part 4 of the procedure is completed, an
electronic tone will sound for 30 seconds.
"
If you do not perform the operations in part 4
within 15 seconds, an error will occur and the elec-
tronic tone will not sound. In this event, perform
the registration steps again beginning with part 3
of the procedure.
5. Before the electronic tone stops sounding, press
the power door lock knob to the “LOCK” side the same
number of times as the leftmost digit of the transmitter
code. For example, press the lock knob eight times if
the leftmost digit of the code is 8.
NOTE
" The electronic tone will stop sounding when you
start entering the number.
"
If you do not start entering the number using the
lock knob before the electronic tone stops sound-
ing, an error will occur. In this event, perform the
registration steps again beginning with part 3 of
the procedure.
"
If the interval between one push of the knob and
the next exceeds five seconds, an error will occur.
In this event, perform the procedure again begin-
ning with part 4. If an error occurs six times, per-
form the procedure again starting with part 3.
LOCK
UB2537CA