Subaru 2005 Legacy User Manual

Page 144

2-19

Keys and doors

– CONTINUED –

3. Perform the following steps within 45 seconds.

1)Open and close the driver’s door once.

A) LOCK
B) ON

2) Insert the key into the ignition switch, then turn it

from the “LOCK” position to the “ON” position 10

times within 15 seconds.

NOTE

When you complete step 2), an electronic tone

will sound once, a buzzer will continue to sound

and the interior light will continue to flash until the

transmitter codes are completely registered.
"

If you do not perform steps 1) and 2) within 45

seconds, an error will occur. Neither an electronic

tone nor the buzzer will sound, and the interior

HS2019CA

UB2215CB