Subaru 2013 Impreza - Manual (Page 320)

Black plate (330,1)
北米Model "A1140BE-A" EDITED: 2012/ 6/ 20
7-38
Starting and operating
combination meter will illuminate.
2. Depress the accelerator pedal until the
vehicle reaches the desired speed.
3. Press the “RES/SET” switch to the
“SET” side and release it. Then release
the accelerator pedal.
Cruise control set indicator light
At this time, the cruise control set indicator
light is illuminated in the combination
meter.
The vehicle will maintain the desired
speed.
Vehicle speed can be temporarily in-
creased while driving with the cruise
control activated. Simply depress the
accelerator pedal to accelerate the vehi-
cle. When the accelerator pedal is re-
leased, the vehicle will return to and
maintain the previous cruising speed.
& To temporarily cancel the
cruise control
The cruise control can be temporarily
canceled in the following ways.
. Press the “CANCEL” button.
. Depress the brake pedal.
. Depress the clutch pedal (MT models
only).
WARNING
For CVT models, do not place the
select lever in the
“N” position while
driving. If the select lever is shifted
into the
“N” position, cruise control
can be canceled but the engine
brake will no longer work. This
could result in an accident.