Subaru 2013 Impreza - Manual (Page 169)

Black plate (171,1)
北米Model "A1140BE-A" EDITED: 2012/ 6/ 20
6. The system will notify you that the
setting is complete for approximately 3
seconds.
& Maintenance settings
The items in the maintenance settings can
be set. To change the items, operate the
“ ” or “ ” switch toward you.
! Preparation for maintenance set-
tings
1. Turn the ignition switch to the “ON”
position, and then pull the “ /SET” switch
toward you for more than 2 seconds.
2. After the selection screen is displayed,
operate the
“ ” or “ ” switch to show the
“Maintenance” item. Then, pull the “ /
SET
” switch toward you.
! Engine oil setting
1. Perform the preparation steps accord-
ing to
“Preparation for maintenance set-
tings ” F3-51.
2. Operate the “ ” or “ ” switch to
select the “Engine Oil” item, and then pull
the “ /SET” switch toward you.
3. Select the setting location (month, day,
year or distance) by operating the
“ ” or
“ ” switch, and then pull the “ /SET”
Instruments and controls
3-51
– CONTINUED –
3