Subaru 2013 Impreza - Manual (Page 229)

Black plate (235,1)
北米Model "A1140BE-A" EDITED: 2012/ 6/ 20
. If RT is 13 characters or longer,
press and hold the
“TEXT” button in
order to change the page.
! Type B audio
Press the
“TEXT” button to show the next
page when the text is not fully displayed
while the PSD (Program Service Data) or
RT (Radio Text) service is received.
NOTE
. When the HD Radio function is
turned on, PSD provides additional
information about the broadcast. Text
data such as
“Title” and “Artist” is
displayed on the screen.
. When the HD Radio function is
turned off (HD Radio off mode), the
radio text is displayed on the screen
while receiving the broadcasting sta-
tion with RBDS (Radio Broadcast Data
System).
& Station preset
! How to preset stations
1. Select the preferred reception mode.
2. Select the preferred station.
3. Press and hold one of the preset
buttons (from
to ) to store the
frequency. If the button is pressed briefly,
the preceding selection will remain in the
memory.
NOTE
. Up to six stations for each reception
mode may be preset.
. If the connection between the radio
and battery is broken for any reason
such as vehicle maintenance or radio
removal, all stations stored in the
preset buttons are cleared. If this
occurs, it is necessary to reset the
preset buttons.
! Selecting preset stations
1. Select the preferred reception mode.
2. Press the preferred preset button
(from
to ) briefly.
! Auto-store (type B audio)
Using the Auto-store function, you can
automatically store 6 stations on the
current waveband (FM-AS or AM-AS) by
pressing and holding the
button.
Use Auto-store to quickly find the stron-
gest stations, for example when traveling
through different reception areas.
NOTE
. When the HD Radio function is
turned on, Auto-store cannot be used
while receiving a broadcasting station
with SPS (Supplemental Program Ser-
vice).
. When you use Auto-store, the new
stations replace any stations pre-
viously stored.
. Interrupting Auto-store: If you acci-
dentally press the
button, you can
cancel the Auto-store function before it
has been completed as follows.
– switching to the other source
mode
– pressing the
button
– switching to the other band
– turning the “TUNE/TRACK/CH”
dial
– pressing the “SCAN” button
! Displaying and selecting preset
stations (type B audio)
1. Press and hold the button during
AM/FM reception to display the radio
screen.
2. Operate the
“TUNE/TRACK/CH” dial
to select the stations.
Audio
5-15
5