beautypg.com

Other service products, Top up the washer fluid, Warning notes – Mercedes-Benz 2013 GLS Class User Manual

Page 341: Maintenance and care, Engine compartment

background image

X

Replace cap : on the filler neck and turn
clockwise.
Make sure that the cap locks securely into
place.

X

Check the oil level again with the oil dip-
stick (

Y

page 338).

For further information on engine oil; see
(

Y

page 410).

Other service products

Checking the coolant level

G

WARNING

The engine cooling system is under pressure,
particularly if the engine is warm. You could
be scalded by hot coolant spraying out when
opening the cap. There is a danger of injury.
Allow the engine to cool before opening the
cap. Wear gloves and protective eyewear
when opening. Slowly turn the cap half a turn
to allow pressure to escape.

X

Park the vehicle on a level surface.
Only check the coolant level if the vehicle
is on a level surface and the engine has
cooled down.

X

Turn the key to position

2 in the ignition

lock (

Y

page 157).

On vehicles with KEYLESS-GO, press the
Start/Stop button twice (

Y

page 157).

X

Check the coolant temperature display in
the instrument cluster.
The coolant temperature must be below
70 †.

X

Turn the key to position

0 (

Y

page 157) in

the ignition lock.

X

Slowly turn cap : half a turn anti-clock-
wise to allow excess pressure to escape.

X

Turn cap : further anti-clockwise and
remove it.
If the coolant is at the level of marker bar
= in the filler neck when cold, there is
enough coolant in coolant expansion
tank ;.
If the coolant level is approximately
1.5 cm above marker bar = in the filler
neck when warm, there is enough coolant
in coolant expansion tank ;.

X

If necessary, top up with coolant that has
been tested and approved by Mercedes-
Benz.

X

Replace cap : and turn it clockwise as far
as it will go.

For further information on coolant; see
(

Y

page 411).

Topping up the windscreen washer sys-

tem/headlamp cleaning system

G

WARNING

Windscreen washer concentrate is highly
flammable. If it comes into contact with hot
engine components or the exhaust system it
could ignite. There is a risk of fire and injury.
Make sure that no windscreen washer con-
centrate is spilled next to the filler neck.

Engine compartment

339

Maintenance and care

Z