beautypg.com

On-board computer and displays, Display messages – Mercedes-Benz 2013 GLS Class User Manual

Page 283

background image

Display messages

Possible causes/consequences and M Solutions

Blind Spot Assist

currently unavail‐

able See Owner's

Manual

or

Active

Blind Spot Assist

currently unavail‐

able See Owner's

Manual

Blind Spot Assist or Active Blind Spot Assist is temporarily inop-
erative. Possible causes:

R

the sensors are dirty.

R

the function is impaired due to heavy rain or snow.

R

the radar sensor system is outside the operating temperature
range.

R

the radar sensor system is temporarily inoperative, e.g. due to
electromagnetic radiation emitted by nearby TV or radio sta-
tions or other sources of electromagnetic radiation.

The yellow 9 indicator lamps also light up in the exterior mir-
rors.
Once the causes listed above no longer apply, the display message
goes out.
Blind Spot Assist or Active Blind Spot Assist is operational again.
If the display message does not disappear:

X

Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.

X

Secure the vehicle against rolling away (

Y

page 180).

X

Clean the sensors (

Y

page 345).

X

Restart the engine.

Blind Spot Assist or Active Blind Spot Assist is deactivated while
towing a trailer.
You have established the electrical connection between the trailer
and your vehicle.

X

Press a on the steering wheel to confirm the display mes-
sage.

Blind Spot Assist

inoperative

 or 

Active Blind Spot

Assist inoperative

Blind Spot Assist or Active Blind Spot Assist is faulty.
The yellow 9 indicator lamps also light up in the exterior mir-
rors.

X

Visit a qualified specialist workshop.

Park Assist cancel‐

led

The driver's door is open and the driver's seat belt has not been
fastened.

X

Repeat the parking process with the seat belt fastened and the
driver's door closed.

You inadvertently touched the multifunction steering wheel while
steering intervention was active.

X

While steering intervention is active, make sure not to touch the
multifunction steering wheel.

Display messages

281

On-board computer and displays

Z