Seats, steering wheel and mirrors, Seats – Mercedes-Benz 2013 GLS Class User Manual
Page 108
Rear seat head restraints
Lowering the rear seat head restraints
from the front
X
Turn the key to position
2 in the ignition
X
Press button :.
Adjusting the rear seat head restraint
angle
CLS Coupé
X
Pull or push the top of the head restraint
until it is in the desired position.
CLS Shooting Brake
X
Pull or push the bottom of the head
restraint until it has reached the desired
position.
i
The tilt angle can only be adjusted on the
two outer head restraints. The centre head
restraint is only height-adjustable.
Removing and fitting the rear seat head
restraints
G
WARNING
The head restraints cannot provide the inten-
ded protection unless they are fitted and
adjusted correctly. There is an increased risk
of injury to the head and neck in the event of
an accident or sudden braking, for example.
Always drive with the head restraints fitted.
Ensure that the centre of the head restraints
support the back of each vehicle occupant's
head at eye level before driving off.
!
Make sure that the rear window roller
sunblind is retracted when removing the
rear head restraints. Otherwise, you could
damage the roller sunblind.
CLS Coupé
X
To remove: pull the head restraint up to
the stop.
X
Press release catch : and pull the head
restraint out of the guides.
X
To refit: insert the head restraint so that
the notches on the bar are on the left when
viewed in the direction of travel.
X
Push the head restraint down until you hear
it engage in position.
106
Seats
Seats, steering wheel and mirrors