Wireless remote control/electronic key battery – TOYOTA 2011 Highlander User Manual
Page 477

473
4-3. Do-it-yourself maintenance
4
Mainten
ance an
d ca
re
Wireless remote control/electronic key battery
Replace the battery with a new one if it is discharged.
■
You will need the following items:
● Flathead screwdriver (To prevent damage to the key, cover
the tip of the screwdriver with a rag.)
● Small Phillips-head screwdriver
● Lithium battery CR2032 (vehicles without smart key system),
CR1632 (vehicles with smart key system)
■
Replacing the battery (vehicles without smart key system)
Remove the cover using a
coin protected with tape etc.
Remove the discharged trans-
mitter battery.
Insert a new battery with the
“+” terminal facing up.
STEP
1
STEP
2
This manual is related to the following products: