beautypg.com

TOYOTA 2011 4Runner User Manual

Page 252

background image

228

2-4. Using other driving systems

Shifting from L4L to H4L

Stop the vehicle completely.
Shift the shift lever to N.

Push the “UNLOCK” button and
turn the four-wheel drive control
switch to H4L.

Maintain this condition until the
low speed four-wheel drive indi-
cator goes off.

STEP

1

STEP

2

CTH24AS051

STEP

3

The four-wheel drive control switch can be operated when

The “ENGINE START STOP” switch is in IGNITION ON mode.

When the four-wheel drive control switch is turned to L4L

VSC and TRAC (TRC) are automatically turned off.

If the center differential lock indicator flashes

Locking or unlocking of the center differential is not complete. Drive straight
ahead while accelerating or decelerating, or drive in reverse.

If the center differential lock indicator flashes and a buzzer sounds

Locking of the center differential is not complete. Stop the wheels from slip-
ping or spinning and, if the indicator still flashes, operate the four-wheel drive
control switch again.

If the low speed four-wheel drive indicator continues to flash

The transfer mode may not successfully change. Operate the four-wheel
drive control switch again.

This manual is related to the following products: