TOYOTA 2011 4Runner User Manual
Page 232
208
2-3. Operating the lights and wipers
■
When the rear window wiper and washer switch is turned off
The rear wiper will stop operation, and return to the retracted position after
approximately 3 seconds.
However, if the engine switch is turned to the “ACC” or “LOCK” position
(vehicles without a smart key system) or the “ENGINE START STOP” switch
is turned to ACCESSORY mode or turned off (vehicles with a smart key sys-
tem) while the rear wiper is operating, the rear wiper will stop at that position
and will not return to the retracted position.
■
If no washer fluid sprays
Check that the washer nozzle is not blocked if there is washer fluid in the
washer fluid reservoir.
■
Customization that can be configured at Toyota dealer
Settings (e.g. drip prevention function) can be changed.
(Customizable features
→P. 640)
NOTICE
■
When the rear window is dry
Do not use the wiper, as it may damage the rear window.
■
When the washer fluid tank is empty
Do not operate the switch continually as the washer fluid pump may over-
heat.
■
When a nozzle becomes blocked
Do not try to clear it with a pin or other object. The nozzle will be damaged.