Mini 2013 Countryman User Manual
Page 229
MOBILITY
Replacing components
228
Tail lamps
Bulb P 21 W
MINI Countryman:
1 Brake/tail lamp
2 Turn signal
3 Brake/tail lamp
4 Backup lamps
5 Backup lamps
MINI Paceman:
1 Brake light
2 Rear lamp
3 Turn signal
4 Backup lamps
Changing
All bulbs are integrated in a central bulb holder.
MINI Countryman:
1.
Switch off the light and remove the infrared
remote control from the ignition lock.
2.
Open the tailgate,
3.
Push the cover panel out from the rear of the
cargo area side trim panel and remove it.
4.
Open emergency release for the fuel filler
flap, see page
, and then push to the
side with the foam insert.
Ensure that the emergency release is not
damaged.
5.
Disengage the bulb holder by pressing down
on the clamping clip, arrow 1.
6.
Take out bulb holder and pull out cable,
arrow 2.
7.
Exerting gentle pressure, turn bulb to the left
and remove.
8.
To insert the new bulb and install the bulb
holder, proceed in reverse order. Ensure that
the lamp holder engages in all the fasteners.
9.
Put foam insert in its original position and
install the emergency fuel flap release.
10.
Install cover.
Online Edition for Part no. 01402917368 - © 10/12 BMW AG