Mini 2013 Countryman User Manual
Page 100
Practical interior accessories
CONTROLS
99
Center Rail
Various accessory parts can be attached to the
Center Rail and installed in different positions.
Do not use accessory parts near the hand
brake; otherwise these could be damaged
when the hand brake lever is operated.
<
Smartphone holder
The upper part of the smartphone holder can be
rotated by 360°.
When installing in the front of the rail, make sure
that there is sufficient space, e.g., away from the
seat; otherwise, damage may be caused when
rotating.
1.
Pull the lever 1 up to unlock the mounts.
2.
First install the smartphone on the Center
Rail with the mounts 2.
3.
To secure, push lever 1 down. Ensure that
the lever can lock it properly.
When connecting a smartphone to the USB
audio interface, see page
, guide the con-
nection cable under the smartphone holder.
Base plate
On the base plate, various accessories can be
attached, such as cup holders, holders for sun-
glasses and cell phone holders.
Inserting base plate
The lever 3 can be locked in three positions.
0 Locking
1 Sliding along the rail
2 Inserting base plate
For inserting, move the lever into position 2.
Sliding and locking
1.
Push lever 3 into position 1.
2.
Slide the base plate.
3.
Push lever 3 down into position 0.
Make sure not to press the lever beyond the
resistance point.
The base plate is fixed in position.
Lock the base plate in place before driv-
ing; otherwise, injuries may result in the
event of an accident.
<
Example: cupholder
Put cupholder in the back between the rear
seats and push in.
Installing cupholder
1.
Lock base plate in place if necessary, refer to
Sliding and locking.
2.
Pull the lever 6 up to unlock the mounts.
Online Edition for Part no. 01402917368 - © 10/12 BMW AG