Lenco MES-204 - Manual (Page 5)

Note: “ ” will be displayed if the function you select is not available.
Installing Battery
Insert 2 “AAA/ UM4” batteries to the remote control prior to use. Make sure to match their
polarities (+/-) to the markings inside the compartment.
NOTES:
- Before throwing any batteries away, consult your distributor who may be able to take
them back for specific recycling.
- In order to avoid leakage, always remove the batteries when unit will not be used for a
long period of time.
- If the remote control is not going to be used for a long time, remove the battery to avoid
damage caused by battery leakage corrosion.
- CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.
ACCESSORIES
AC/DC adaptor x2
Headphones x2
Car mounting bag x2
AV cable x1
Remote control x1
Car adaptor with AV cable x1
POWER SUPPLY
Using the AC adaptor
The supplied AC adaptors are suitable for use on AC mains supplies of 100-240V~ and
should only be connected to a mains supply within these parameters.
There are 2 types of AC adaptors supplied, one is for main unit, the other is for the
monitor.
EN - 4
Caution: Only use AC adaptors of the type specified here. Failure to do so may
cause a fire or damage the player or the monitor.
AC/DC adaptor for main unit
Input: AC 100-240V~ 50/60Hz
Output: DC 9V 2A
AC/DC adaptor for Monitor
Input: AC 100-240V~ 50/60Hz
Output : DC 9V 1A