Lenco MES-204 - Manual (Page 2)

LCD (TFT) Display
Power ON indicator : When the unit is switched ON, the light will illuminate. The light
will change from GREEN to RED if unit is switched to Standby mode.
Charging indicator: The charging indicator will go off when the battery becomes fully
charged.
Remote sensor
LCD MODE / DVD/ USB/SD button: To access LCD mode and source mode.
Short press to enter LCD mode. Press , on main unit to select the aspect ratio
between 16:9 and 4:3. Press , to select Brightness, Contrast or Color, then press
, on main unit to adjust its level.
Long press to enter source mode. Press , to select DVD, USB or Card mode and
then press Enter to confirm.
EN - 1
LOCATION OF CONTROLS
Main Unit
1.
2.
3.
4.
5.