Lenco MES-204 - Manual (Page 4)

EN - 3
7.
8.
9.
10.
11.
12.
13.
14.
buttons : Use these buttons
to adjust the Brightness, Contrast and
Color level of the monitor.
Power ON/OFF switch: To switch on the
monitor
DC IN 9V jack
VIDEO jack
AUDIO jack
Headphone jack
VOLUME control : To adjust the volume
Stand : Lift up the stand from its groove;
Support it against the stand or draw the
stand out and then fix it in position by
clicking down the LOCK button.
Remote control
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
LCD Mode : To access LCD mode of the unit.
Title : To access the disc title menu
Display : To show status information on the screen.
(Standby): To turn unit on /off (STANDBY mode).
Menu : To access the disc menu during playback ;
Turn PBC ON/OFF for VCD.
Setup: To enter the Setup menu
Mute : To mute or restore sound.
Zoom: To access the zoom function
: To navigate through the on-screen menus.
Enter : To confirm the selection during menu navigation
: To start and pause the playback
: Press once to pre-stop (resume with ),
press again to stop playback.
/ : To directly access the next or previous
chapter (DVD) or track (CD).
/ : To start reverse or forward accelerated
playback.
0,1,2…9 : Number entry
Clear : To clear inputs.
Search : To search for a desired chapter or time.
Step : To play frame by frame
A-B (Repeat A-B): To repeat section A to B
Repeat: To repeat playback .
Slow : To play at slow motion.
DVD/USB/SD : To select between DVD, USB and Card mode
Audio : To change the audio setting
Subtitle : To change the subtitle setting
Angle: To access the camera angle function for DVD disc
Program: To program playback sequences.