4 the analogue outputs menu, Nac-n 172 xs setup – Naim Audio NAC-N 172 XS User Manual
Page 14
12
NAC-N 172 XS Setup
4.3.2 DAB Input
Parameter Options
Enabled:
Yes / No
Name:
User definable
Input Trim:
±10dB
Re-scan Stations:
Re-scans for DAB
stations.
Note:
The NAC-N 172 XS DAB input is not implemented
in units distributed in territories where Digital Audio
Broadcasting is unavailable.
4.3.3 iRadio Input
Parameter Options
Enabled:
Yes / No
Name:
User definable
Input Trim:
±10dB
Auto Disconnect:
Select time.
Auto-disconnect is provided so that
internet provider data usage limits are not
inadvertently exceeded if a NAC-N 172 XS
is left connected to internet radio.
Browse History:
Yes / No. If
Yes
is specified the
NAC-N 172 XS will display the last used
station if it is available when list mode is
selected. If
No
is specified NAC-N 172 XS
will display the top station selection menu.
4.3.4 UPnP™ (Network) Input
Parameter Options
Enabled:
Yes / No
Name:
User definable
Input Trim:
±10dB
Restore History:
Yes / No. If
Yes
is
specified NAC-N 172 XS will remember the
last used folder if the UPnP™ server is still
available. If
No
is specified NAC-N 172 XS
will display the full list of available servers.
4.3.5 USB/iPod Input
Parameter Options
Enabled:
Yes / No
Name:
User definable
Input Trim:
±10dB
Folder History:
Yes / No. If
Yes
is specified the NAC-N 172 XS will
automatically display the last used folder
on the USB device. If
No
is specified the
top level folder of the device will be
displayed.
Charge:
Always / Never. iPod battery charging
takes place
always
when the iPod is
connected or
never
takes place.
Note:
The non-charging option is provided because there is
a small reduction in iPod sound quality when simultaneously
charging and playing. This means however that an iPod can
potentially run out of power while playing.
4.3.6 Front Panel Input
Parameter Options
Enabled:
Yes / No
Name:
User definable
Input Trim:
±10dB
Format:
Auto / Analogue
/ Digital. If
Auto
is specified the front
panel input will automatically detect the
audio signal format (analogue or digital)
and configure the input appropriately.
Specifying
Analogue
or
Digital
will fix the
front panel input format.
4.3.7 Rear Panel Digital Inputs
Parameter Options
Enabled:
Yes / No
Name:
User definable
Input Trim:
±10dB
Unstable source:
Yes / No
Select
No
unless the NAC-N 172 XS has
problems locking to a digital signal.
Selecting
Yes
will enable the unit to play
unstable digital signals, however sound
quality will be slightly degraded.
4.3.8 Rear Panel Analogue Inputs
Parameter Options
Enabled:
Yes / No
Name:
User definable
Input Trim:
±10dB
AV Fixed Volume:
Yes / No
If
No
is selected the input will behave
normally. If
Yes
is selected the input will
operate at a fixed volume and the
NAC-N 172 XS volume control will be
disabled. This enables NAC-N 172 XS
to be used in multi-channel AV systems
with volume control handled by the AV
processor.
Take care when selecting AV
Fixed Volume
.
4.4 The Analogue Outputs Menu
The Analogue Outputs menu
enables the preamplifier DIN and
RCA phono output maximum
volume and balance to be set.
The volume and balance settings
apply simultaneously to both
outputs.
Parameter Options
Max. Volume:
0 to 100 (adjust using handset
6
or
5
keys)
Balance:
-10 to + 10 (adjust using handset
6
or
5
keys)
DAB 4/4
Enabled:
Yes
Name:
DAB
Input Trim:
0
4
Re-Scan Stations
iRadio 4/5
Enabled:
Yes
Name:
iRadio
Input Trim:
0
4
Auto Disconnect: 4Hrs
UPnP 3/4
Enabled:
Yes
Name:
UPnP
4
Input Trim:
0
Restore History
Yes
USB/iPod 4/5
Enabled:
Yes
Name:
USB/iPod
Input Trim:
0
4
Folder History:
No
Front 4/4
Enabled:
Yes
Name:
Front
Input Trim:
0
4
Format: Auto
Digital 1
1/4
4
Enabled: Yes
Name:
Digital 1
Input Trim:
0
Unstable Source
No
Analogue 1
1/4
4
Enabled: Yes
Name:
Analogue
Input Trim:
0
AV Fixed Volume
No
Analogue Outputs
1/2
4
Max. Volume:
100
Balance:
0