Uniti series cd player, 1 disc loading, 2 cd transport control – Naim Audio SuperUniti User Manual
Page 26: 3 cd display and track selection, 4 cd track playlist programming

24
may also be selected by entering the track numbers using 
the handset numeric/text keys.
To repeat an entire CD (or 
programmed running order) press 
the handset repeat ( 
) key. To
shuffle (randomise) track order 
press the handset shuffle ( 
) key.
Shuffle and repeat can also be engaged using the Naim app.
Pressing the front panel or handset ok/list key will switch 
the display to list mode where the CD tracks and their 
individual running times are listed. A Program option is also 
shown. Tracks can be selected to play by scrolling up and 
down the list using the handset up (
5
) and down (
6
) keys
and pressing the ok/list key. Select Program to alter the CD 
running order and to suppress or repeat tracks.
6.4 CD Track Playlist Programming
Selecting Program from a CD track 
list opens the Modify Program 
menu. Selecting New - All Tracks 
creates a track playlist containing 
all the tracks on the currently 
loaded CD and opens the Program menu. Selecting New 
- No Tracks creates an empty playlist and opens the Select 
to Add menu. Edit and Clear are only displayed if there is 
an existing playlist. Edit opens the Edit Program menu while 
Clear deletes the existing playlist.
Note: If the desired playlist contains the majority of the 
tracks on the CD select New - All Tracks and delete the 
unwanted tracks. Alternatively, if the desired playlist 
has just a couple of tracks from the CD select “New - No 
tracks” and add the desired tracks.
Note: CD play will stop if the Modify Program menu is 
selected while play is underway.
The
Program
menu displays a list
of track numbers in the left hand 
column and their individual running 
times in the right hand column. The 
order of the track numbers, top to 
bottom, reflects the order in which they will play. 
6. Uniti Series CD Player
6.1 Disc Loading
UnitiLite
To open the CD drawer press the remote handset or front 
panel stop button with the CD input selected. Press stop 
again to close the drawer. To both close the drawer and play 
the CD, press the remote handset or front panel play button. 
To open the drawer while a CD is playing press stop twice.
UnitiLite will automatically read the disc index when the CD 
drawer is closed. If Auto Play is specified in the CD setup 
menu (see Section 4.3.1) playback will begin to from track 
one immediately after a CD is loaded.
NaimUniti 2
To load a CD pull open the drawer using the handle on 
the left hand side of the unit. Place the CD on the platter 
followed by the magnetic puck. Do not use a puck from 
any other Naim CD player. Different Naim CD players use 
dissimilar pucks. Push the door closed.
NaimUniti 2 will automatically read the disc index when 
the CD drawer is closed. If Auto Select is specified in the 
CD setup menu (see Section 4.3.1) NaimUniti 2 will switch 
automatically to the CD input. If Auto Play is specified the 
CD will begin to play from track one immediately.
6.2 CD Transport Control
CD transport (play, stop, etc.) can 
be controlled from either the front 
panel transport buttons (play, 
prev, next, stop), from the remote 
handset transport keys 
( 
) or using the Naim app.
Note: To engage or disengage pause using the front panel 
controls press play. 
6.3 CD Display and Track Selection
When a CD is loaded its total 
playing time and number of tracks 
will display.
If CD auto play is engaged the CD 
will begin playing immediately. 
During play the display will show the track number and its 
elapsed time. The stop icon at the top of the display will 
change to a play icon.
In either play or stop mode CD tracks may be selected 
either by using the front panel prev and next buttons, the 
handset prev and next keys or using the Naim app. Tracks 
The UnitiLite and NaimUniti 2 incorporate a fully featured CD player based on custom Naim transport control software and 
high performance digital and analogue electronics. Select the CD input to begin using the CD player.
CD Play List
 Program... 
4
1 6:42
 2 4:20 
 3 3:56 
Modify Program
1/4
4
New - All Tracks
 New - No Tracks 
 Edit 
 Clear 
Program [56:22]
3/8
 1 02:34 
 2 04:20 
4
3 03:17
4 07:21
42
CD
44:47
12 Track CD
42
CD
01 01:32
