beautypg.com

Electrical connections, Shield – Nexen TA100 964400 User Manual

Page 6

background image

2

FORM NO. L-20292-C-0700

TA110 GENERAL DIMENSIONS

FIGURE 2

ELECTRICAL CONNECTIONS

NOTE

Make electrical connections as shown in Figures 3 through 6 for the type of load sensor used. To maintain NEMA 12
strain relief ratings, the cables must have a diameter in the range of 0.161-0.314 inches. Unused strain relief holes
must be plugged.

FIGURE 3
TYPE CFL LOAD SENSORS

FIGURE 4
TYPE SW LOAD SENSORS

WARNING

The TA100A and TA110A
are powered by 24VDC and
will be damaged by
110VAC.

SHIELD

This manual is related to the following products: