Nexen TCC-7 835197 - Manual (Page 4)

1 FORM NO. L-20176-C-0210
GENERAL SPECIFICATIONS
Specifications
Torque
Up to 47.5 Nm (420 in-lbs)
Actuation Pressure 1 - 5.5 bar (14.5 - 80 psi)
Service Temperature 4.5º - 104º C (40º - 220º F)
Approximate Weight Components up to 7 kg (15 lbs)
GENERAL SAFETY PRECAUTIONS
WARNING
Ensure proper guarding of the product is
used. Nexen recommends the machine
builder design guarding in compliance
with OSHA 29 CFR 1910 “Occupa-
tional Safety and Health Hazards.”
CAUTION
Watch for sharp features when
interacting with this product. The parts
have complex shapes and machined
edges.
WARNING
This product is capable of emitting a
spark if misused, therefore is not
recommended for use in any explosive
environment.
CAUTION
Use appropriate guarding for moving
components. Failure to guard could
result in serious bodily injury.
CAUTION
This product has possible pinch points.
Care should be taken when interacting
with this product.
CAUTION
This product has possible pinch points.
Care should be taken when interacting
with this product.
CAUTION
Use lifting aids and proper lifting
techniques when installing, removing or
placing this product in service.
CAUTION
Surface temperature may exceed safe
handling limits during operation. Do not
touch.