Denon AVR-2106 User Manual

Page 29

ENGLISH

Basic Operation

Tone control setting

Adjusting the sound quality (tone)

The tone control function will not work in the PURE DIRECT or
DIRECT mode.

Press the

TONE CONTROL

button.

TREBLE

BASS

Turn the

SELECT

knob to adjust the level of the

bass or treble.

The tone switches as follows each time the TONE CONTROL
button is pressed.

To increase the bass or treble:
Turn the control clockwise. (The bass or treble sound can be
increased up to +6 dB in steps of 1 dB.)
To decrease the bass or treble:
Turn the control counterclockwise. (The bass or treble sound
can be decreased down to –6 dB in steps of 1 dB.)

Tone defeat mode

If you do not want the bass and treble to be adjusted, turn on the
tone defeat mode.

Press the

TONE DEFEAT

button.

The signals do not pass through the bass and treble
adjustment circuits, thus resulting in higher quality sound.

Channel Level

You can adjust the channel level either according to the playback
sources or to suit your taste, as described below.

Press the

CH SELECT

button to select the

speaker whose level you want to adjust.

SBL

SBR

The channel switches as shown below each time the button
is pressed.

When the surround back speaker setting is set to “1sp” for
“Speaker Configuration”, this is set to “SB”.
“SB” appears only when the “Power Amp Assign.” setting
is the surround back mode.

Press the

CURSOR F

button to adjust the

level of the selected speaker.

The default setting of the channel level is 0 dB.
The level of the selected speaker can be adjusted within the
range of +12 to –12 dB by pressing the CURSOR buttons.
The SW channel level can be turned off by decreasing it one
step from –12 dB.

OFF

´ –12 dB ´ +12 dB