G-Shock GW-9200BPJ-1 - Manual (Page 76)

E-74
To set an alarm time
1. In the Alarm Mode, use E and B to scroll
through the alarm screens until the one whose
time you want to set is displayed.
2. Hold down A until the hour setting of the alarm time start to flash. This
indicates the setting screen.
• This automatically turns on the alarm.
3. Press D to move the flashing between the hour and minute settings.
4. While a setting is flashing, use E (+) and B (–) to change it.
• When setting the alarm time using the 12-hour format, take care to set
the time correctly as a.m. (no indicator) or p.m. (P indicator).
5. Press A to exit the setting screen.
AL1 AL2 AL3
SIG SNZ AL4
E
B
Alarm on indicator