G-Shock GW-9200BPJ-1 - Manual (Page 60)

E-58
Clearing the Historical Record
Use the following procedure to clear the contents of the historical record and
restart all values from zero.
To clear the historical record
• Before trying to clear data, first check to make
sure that the Altimeter Mode stopwatch is
stopped and reset to all zeros (page E-44).
1. Press the D button to enter the Data Recall
Mode.
2. Hold down A.
• CLR will appear in the upper part of the
display.
3. Keep A held down for an additional two seconds until CLR starts flashing.
• The historical record high altitude screen will reappear when data deletion
is complete.
• If you release the A button before CLR starts flashing in step 3, the
watch will return to the historical record high altitude screen without
deleting the data.