G-Shock GW-9200BPJ-1 - Manual (Page 59)

E-57
1. Enter the Data Recall Mode (page E-11).
2. Use the C button to cycle between the altitude records, current Altimeter
Mode stopwatch record, and the historical record.
3. When the record you want is displayed, use the E (+) button and B (–)
button to scroll through its data. Holding down the E or B button scrolls
data at high speed.
4. After you are finished viewing data, press D to exit the Data Recall Mode.
• Dashes ( xxxx ) will be displayed if data has been deleted or if there is no
corresponding data due to error, etc. In such cases, total ascent ( ASC )
and total descent ( DSC ) values will show zero.
• When total ascent ( ASC ) or total descent ( DSC ) exceeds 99,995 meters,
the applicable value will restart from zero.