G-Shock GW-9200BPJ-1 - Manual (Page 44)

E-42
To specify the altitude reading interval
1. In the Altimeter Mode, hold down A for about
two seconds until either OFF or the current
reference altitude value (page E-50) starts to
flash. This is the setting screen.
2. Press D.
• This will cause the currently selected
altitude reading interval (0'05" or 2'00") to
flash on the display.
3. Press E to toggle the setting between 0'05"
and 2'00".
• 0'05": Readings at five-second intervals for
one hour
• 2'00": Readings at five-second intervals for
the first three minutes followed by
two-minute intervals for 10 hours
4. Press A to exit the setting screen.
ll
ll
lllll
l
ll
llllll
ll
l
ll
ll ll ll ll
ll
l
ll
lll
Altitude measurement
interval