Remote commands, Emote, Ccess – Xblue Networks X16 User Manual
Page 48: X16 user guide
X16 User Guide
Issue 2
-
48
-
Vo
ic
e Mai
l
Remote Commands
Mailboxes may be accessed from outside of the system using a telephone with
standard DTMF (Touchtone
®
) dialing.
Remote Access
Call into the system and let the Auto Attendant answer the call and then dial the
desired extension number. If the extension is forwarded to voicemail, and the
mailbox answers, enter the “Remote Access code” (default remote access code is
123) which is programmed in the “Phone Programming Area”.
Once connected remotely, the system will prompt you through the remote
control menu.
Replay Previous
Message
Play All New Messages
Play All Messages
Skip to Next Message
Record Memo
Stop
Play Personal OGM
Repeat this Menu
** - Erase Playing
Message
Transfer to Auto
Attendant