Xblue Networks X16 - Manual (Page 29)

Issue 2 -
29 -
Fea
tu
re
s
Backlit Blue LCD Display
Each digital telephone endpoint (speakerphone) comes equipped with a backlit
display, which can be programmed to go into power saver after it has being idle
for 60 seconds. The backlit display is immediately activated whenever an action
such as ringing, going off hook or pressing any of the fixed or preprogrammed
buttons, is taken.
Call Pick up
There are two types of call pick up, intercom and CO Line. In both cases, the
telephone that has the call picked up from must be ringing.
Intercom – When one extension calls another extension, but the called
party is not there, the calling party presses the
 key to activate ringing.
If the extension user of the called party hears their extension ringing,
they may press the
 key on any other telephone endpoint and pick up
the actively ringing call.
CO Line – Transferred Telephone Company Lines can be picked up by
another extension by press the
 key on their telephone endpoint.
- When the  key is pressed the first ringing extension will be picked
up.
- When the  key is pressed the first transferred CO Line will be
picked up.
Call Timer
When making or receiving a call the backlit display shows the time that the call
has been connected in four digit format (00:00). If the call exceeds 99 minutes
and 59 seconds (99:59) the timer will begin again.
Caller ID and Call Waiting Caller ID (Type 1 & Type 2)
The telephone company offers two types of caller ID; type 1 and type 2. Type 1
caller ID presents the caller‟s name, number (when available) and the date and
time of each call. Type 2 incorporates all of the features of type 1 plus it adds
call waiting, caller ID. The system will automatically begin working with caller ID
when the user subscribes for the telephone companies Caller ID service, and it
will set the system‟s time and date.
Caller ID Enable/Disable
Caller ID can be enabled or disabled at each telephone endpoint (speakerphone).
When disabled, the extension will not receive or have access to Caller ID. When
Caller ID is disabled, and the button is pressed, a tone will be heard indicating
that Caller ID is not accessible.