Vortech 1988-1992 5.0L/5.7L TPI F-Body - Manual (Page 20)

P/N: 4GF020-010
©2002 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
12JAN01 V1.1
(88-92 350 TPI Camaro(4GF V1.1))
BLACK
CONNECTOR
GREY
CONNECTOR
HEAVY
PINK
WHITE
(TO TACH)
WHITE
WHITE
PINK
RED
ORANGE
WHITE
IGNITION
COIL
DISTRIBUTOR
BLACK
CHASSIS
GROUND
TO MANIFOLD
VACUUM
BOOST
RETARD
CONNECTOR
MAGNETIC
PICKUP
CONNECTOR
(NOT USED)
BOOST
RETARD
0
1 2
3
®
SUPERCHARGERS
Ignition/Boost
Control
MANUFACTURED FOR
VORTECH SUPERCHARGERS
BY
MSD
12. WINDSHIELD WASHER RESERVOIR
A. Fit the supplied washer reservoir in the area
behind the grill on the radiator core support
(inward of the driver's side headlight). Use the
hardware in the kit to secure the reservoir in
place.
B. Secure the washer pump with the Adel clamp
provided to the flat area next to the new fuel
pump.
C. Extend the inlet hose from the pump to the
reservoir outlet and fill the reservoir with fluid.
A. Mount the Ignition/Boost Control unit within the
engine compartment. The location should be as
cool as possible, away from moving parts and
within reach of the wire harness.
B. Plug the harness connector into the box con-
nector.
C. Connect the black wire to a clean chassis ground.
D. Cut the white wire between the distributor and
black connector and connect to the white and
orange wire as shown with the crimp-type con-
nectors provided.
13. IGNITION/BOOST CONTROL INSTALLATION
10