Vortech 1988-1992 5.0L/5.7L TPI F-Body User Manual

Page 17

P/N: 4GF020-010

12JAN01 V1.1

(88-92 350 TPI Camaro(4GF V1.1))

A. Attach the supercharger drain hose to the fitting

on the bottom of the supercharger and secure
with the clamp provided. Make sure the clamp
is rotated so that it will not interfere with the
mounting plate when installed.

B. Mount the supercharger to the mounting plate

with the five 3/8-16 x 1" bolts and washers as
shown and tighten to 24 ft./lb.

C. Attach the oil feed line and secure. Use only oil

and no sealants.

D. Install the new accessory drive belt as per the

original diagram except over the added idler.

E. Loosely attach the tensioner bracket to the

supercharger and fit the supercharger drive belt
as shown in the diagram below. Adjust belt
tension by rotating the adjuster plate and se-
cure. Be careful not to overtighten the fasteners.

TENSIONER
PULLEY & BRACKET

ALTERNATOR

IDLER PULLEY
& SPACER

SUPERCHARGER

POWER STEERING
PUMP PULLEY

WARNING: The oil system contains a small

orifice that is easily plugged. DO
NOT use any type sealant on any
of the threads. Instead, use clean
engine oil. Disassemble and blow
out entire line if you have any
doubts.

SUPERCHARGER MOUNTING