System features learn routine – Directed Electronics MERLIN 2000 User Manual

Page 17

system features learn routine

The System Features Learn Routine

™

dictates how the unit operates. It is possible to access and change any of

the feature settings using the Valet

/Program switch.

Ignition: Turn the ignition on, then back off. (The H1/9 YELLOW wire must be connected.)

Select a feature: Press and release the Valet

/Program button the number of times corre-

sponding to the feature you wish to change. For example, to access the third feature, press

and release the Valet/Program button three times. Then press the button once more and

HOLD it. The siren will chirp the number of times corresponding to the feature you have

accessed.

Program the feature: While holding the Valet

/Program button, you can toggle between

the feature settings using the remote transmitter. If using a transmitter that has been pro-

grammed with either Autolearn Configuration 1 or 2, pressing

will select the one-chirp

(default setting) and pressing

will select the two-chirp setting. If using a transmitter

that has been programmed with Autolearn Configuration 3, these buttons have opposite

functions, so that pressing

will select the one-chirp (default setting) and pressing

will select the two-chirp setting.

NOTE: Features 5, 6 and 7 each have multiple settings. Pressing

will toggle through all

the possible settings.

4. Release

the

Valet

/Program button.

Once a feature is programmed:

■ Other features can be programmed.
■ The learn routine can be exited if programming is complete.

To access another feature:

1. After programming a feature (Step 3 above), press and release the Valet

/Program switch the number of times

necessary to advance from the feature you just programmed to the next one you want to program.

2. Then press the Valet®/Program switch once more and hold it.

Example: In Step 3 above, if you just programmed the third feature in the menu and you would like to program

the seventh feature in the menu, you would press and release the Valet®/Program switch four times and then

press it once more and hold it. The siren would chirp seven times to confirm access to the seventh feature.