About the hardware updater, Technical requirements – Turning Technologies Hardware Updater User Manual
Page 4
Hardware Updater
4
ABOUT THE HARDWARE UPDATER
Users can update the firmware on their Turning Technologies hardware via the Hardware Updater. The Hardware Updater is
available for download from the Turning Technologies website.
Technical Requirements
The following are required for the Hardware Updater to properly function.
l
Microsoft Windows 32-bit or 64-bit XP, Vista, 7 or 8
l
Intel or AMD 600 Mhz class processor (1 GHz or higher recommended)
l
256 MB RAM (256 MB or more of available RAM recommended)
l
100 MB hard disk space (an additional 32 MB is required if Microsoft .NET Framework 2.0 is not installed)
l
Standard USB 2.0 port
l
Ethernet or 802.11 compatible wireless network card
l
Active Internet connection
Compatible Devices:
l
ResponseCard XR
l
ResponseCard NXT
l
ResponseCard AnyWhere
l
ResponseCard Programmer
l
RF Receiver (RRRF-02)
l
RF+ Receiver (RRRF-03)
l
RF Receiver (RRRF-04)
l
Proctor Receiver (RRRF-03-P)
IMPORTANT
If using a firewall, be sure to allow
permission to connect.
turningtechnologies.com/user-guides