Tiptop Trigger Riot User Manual
Page 17
Common speed settings are displayed as their notation value (t = triplet, d =
dotted):
DIN
4
24 PPQN
64th
6
32t
8
32nd
12
16t
16
32d
18
16th
24 4 PPQN
8t
32
16d
36
8th
48
4t
64
8d
72
4th
96 1 PPQN
Clock Shift Mode:
Clock Shift moves the trigger in time by whole clocks steps. The range is from 0 to
Division-1 so a division of 4 can be shifted up to 3 clock ticks.
Example:
Divide 8, Clock Shift 0 triggers on counts 8, 16, 24, 32...
Divide 8, Clock Shift 5 triggers on counts 13, 21, 29, 37...
Time Shift:
Time shift moves a trigger in time by very small increments which are a fraction of
the clock rate of a division and is great for adding swing and off the grid timings.
The values are in degrees from 0 to 360 giving very fine adjustment in timing. It
is also calculated after Clock Shift so Time Shift can be a fraction of the Clock
Shift delay. 180 degrees is halfway between the Divide + Clock shift and the next
division. The combination of Clock and Time Shift will never be more than the total
time of a division.
Examples
Divide 8, Clock Shift 0, Time Shift 180: 12, 20, 28, 36
Divide 8, Clock Shift 4, Time Shift 0: 12, 20, 28, 36
Divide 8, Clock Shift 4, Time Shift 180: 14, 22, 30, 38
17