Taser X26 - Manual (Page 9)

TASER® CDPM Operating Manual • MMU0014 Rev: B 9
7. Decide what 5-digit number you want to use for your activation
code. Only digits 1 through 9 are valid for the activation code.
You cannot select the number 0. Also, it is not advised to use
1-1-1-1-1 as an activation code due to its simplicity to decipher.
8. Press the Illumination Selector (seen in Figure 7) repeatedly until
the desired number for the specified activation code digit is
displayed on the right side of the CID.
Note: Using pens or paper clips to press the Illumination Selector switch may damage it.
Pull the trigger switch once. The system will select that number and advance to
the next number in the 5-digit code. A number “2” should then display on the
left side of the CID (as seen in Figure 8).
Figure 8
Figure 7
Illumination Selector