Taser X26 User Manual

Page 18

Text mode
Original mode

TASER® CDPM Operating Manual •

MMU0014 Rev: B

Note: If a “P” is not displayed, the DPM is invalid or the revision level is under 22. Using a CDPM as
described in the note for step 9 above can avoid this. If the “P” is not displayed, remove the DPM and
repeat step 9 with a CDPM or use a DPM with a revision of 22 or higher.

11. At the conclusion of the boot up sequence, the de-configuration is complete. The device

is now a standard X26 device, ready for use when the safety switch is placed in the up (ARMED)

position.