SVS AS EQ1 - Manual (Page 8)

AS-EQ1 Operator Manual
© 2009 SV Sound, LLC
•
6420 Belmont Avenue, Girard, OHIO
•
703.845.1472
•
www.svsound.com
SV Sound, LLC
About This Manual
This document is intended to provide you with all the information necessary to properly install and integrate
the SVS AS-EQ1 into your audio environment. After installing the Sub EQ GUI on your personal computer
and properly attaching the AS-EQ1 to your Audio Video Receiver (AVR) or Preamp/Processor (Pre/Pro), you
will be able to quickly step through a small number of tasks designed to equalize your subwoofer(s) in your
listening environment. This manual will discuss each task in detail and discuss what you should see at the
conclusion of each task.
When referencing the AS-EQ1 in this manual, we are referring to the hardware device that integrates into
your audio system. When referencing Sub EQ in this manual, we are referring to the software GUI that
runs on your PC to facilitate calibrating your AS-EQ1 to your listening environment.
In addition to the information contained in this manual, you will also find directed workflow reminders in
the Sub EQ GUI to ensure the steps contained in each task are performed in the proper sequence.
NOTE:
It is strongly recommended you read through
this manual in its entirety before installing and setting up
the AS-EQ1 to ensure understanding of what each task is in-
tended to accomplish, and to make the actual activity of equal-
izing your subwoofer(s) a simple and straightforward exercise.
You will also find helpful tips and techniques in this manual
that are not found in the GUI for reasons of space.
8