beautypg.com

Sv sound, llc – SVS AS EQ1 User Manual

Page 20

background image

AS-EQ1 Operator Manual

© 2009 SV Sound, LLC

6420 Belmont Avenue, Girard, OHIO

703.845.1472

www.svsound.com

SV Sound, LLC

20

Calibrating the AS-EQ1 in Your Listening Environment

4. Attach the Calibration Microphone supplied with the AS-EQ1 to the Cal Mic Input on the front of the

AS-EQ1. DO NOT use the microphone supplied with your AVR or Pre/Pro or any other Microphone as it

may produce inaccurate results.

5. Connect the SAT Center/Left Output on the back of the AS-EQ1 to the Left or Center Multi Channel

Analog Input on your AVR or Pre/Pro. If you do not have Multi Channel Inputs on your AVR or Pre/Pro,

you can use a regular stereo (White/Red) input using the Left or Right front speaker. Ensure that any

processing or bass management your AVR or Pre/Pro may be performing on those inputs is disabled

and the appropriate input is selected on your AVR or Pre/Pro for playing the Level Matching test tone.

6. Place the AS-EQ1 Calibration Microphone at the main listening position at ear height with its tip pointed directly

at the ceiling.

7. It is important all sources of background noise have been quieted in the room to ensure accurate data acquisition.

NOTE:

There are two different methods for Level Matching your SATs and Sub(s); one for

Audyssey equipped AVRs or Pre/Pros, and one for non-Audyssey equipped AVRs or Pre/Pros. Please
refer to the appropriate section below for your type of AVR or Pre/Pro.