beautypg.com

Detection results entry into avr or pre/pro, Task, Detection results – SVS AS EQ1 User Manual

Page 27: Sv sound, llc

background image

AS-EQ1 Operator Manual

© 2009 SV Sound, LLC

6420 Belmont Avenue, Girard, OHIO

703.845.1472

www.svsound.com

SV Sound, LLC

27

If you are calibrating an Audyssey-equipped AVR or Pre/Pro, skip this section by clicking the button

to move on to the next task, “Save Results to AS-EQ1” as these values will be determined and set in a

subsequent step using MultEQ on your AVR or Pre/Pro.

Calibrating the AS-EQ1 in Your Listening Environment

TASK:

Detection Results

NOTE:

If your satellite speaker has useable extension and output at 40Hz, the AS-EQ1 may recommend it be set to

LARGE (full range). SVS recommends that all speaker channels be set to SMALL for Home Theater applications unless the
speaker(s) in question actually have clean/usable output down to 20Hz (which is very rare). Select the crossover frequency
for your speakers that best corresponds to their actual usable bass output and extension (60Hz – 100Hz is typical) and consult
with SVS Support if you need guidance.

FIG. 17